FS26 surface mount schottky rectifier reverse voltage 60v forward current 2a features ? super low vf schottky barrier diodes ? very low profile - typical height of 1.0 mm ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1, per j-std-020 ? aec-q101 qualified ? high temperature soldering guaranteed: 260 /10 seconds ? halogen-free according to iec 61249-2-21 definition typical applications for use of fast swiching in rf module, lighting, cellular phone, portable device, power supplies and other consumer applications. vrrm v vrms v vdc v if(av) a ifsm a t j c t stg c maximum instantaneous forward voltage if=2a,ta=25 v f volts ta=25 ua ta=125 ma typical junction capacitance 4.0 v, 1 mhz c j pf typical thermal resistance 1) juntion to ambient r ja juntion to case r jc juntion to mount r jm note:1),the thermal resistance from junction to ambient,case or mount,mounted on p.c.b with 55mm copper pads,2 oz,fr4 pcb 0.70 maximum dc reverse current at rated dc blocking voltage i r 200 30 645 95 /w 60 35 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol FS26 unit peak forward surge current 8.3 ms single half sine- wave superimposed on rated load 50 operating junction temperature range - 55 to + 150 storage temperature range - 55 to + 150 maximum rms voltage 42 maximum dc blocking voltage 60 maximum average forward rectified current 2.0 maximum repetitive peak reverse voltage 60 maximum ratings (ta = 25 c unless otherwise noted) parameter symbol FS26 unit esga (sod - 123fl) www.goodark.com 1/4 2014.12-rev.a
FS26 surface mount schottky rectifier reverse voltage 60v forward current 2a ratings and characteristics curves (ta = 25 unless otherwise noted) figure 3. typical instantaneous forward characteristics figure 4. typical reverse characteristics figure 1.forward current derating curve figure 2.maximum non - repetitive peak forward surge current figure 5. typical junction capacitance www.goodark.com 2/4 2014.12-rev.a
FS26 surface mount schottky rectifier reverse voltage 60v forward current 2a package outline dimensions packing information packing quantities: 3000 pcs/reel, 40 reels/box; 8mm tape, 7" reel tape & reel specification soldering footprint www.goodark.com 3/4 2014.12-rev.a dim min max min max a 0.9 1.08 0.035 0.043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 he 3.5 3.9 0.138 0.154 unit: inch unit: mm
FS26 surface mount schottky rectifier reverse voltage 60v forward current 2a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good- ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.12-rev.a
|
